Fibreglass render mesh ECO NET MDX 140g/m2 white 50sqm

Fibreglass mesh ECO NET 140 g

Mesh size: 5 mm x 5 mm 5%

Length: 50 m 1%

Width: 1 m 5%

Resin content: 18~20%

Tensile strength: 1500 (N/50 mm)

APPLICATION: Used for strengthening the outer layer of adhesive mass in building insulation systems. It is characterized by an appropriate level of tensile strength; has an even and durable weave and is resistant to alkalis. The implementation of the reinforcing layer begins with the application of a primer made of adhesive mass.

 Then a strip of the required MASTERNET 145 glass fiber mesh is cut off and pressed in several places on the wall covered with glue using a notched trowel. It is then embedded . Subsequent strips of fiberglass mesh should be laid with an overlap of at least 10 cm and with a 15 cm wide overlap in the corners. The last step is to smooth the adhesive mass to obtain an even, smooth layer. The minimum thickness of the reinforcing layer is 5 mm. It is recommended to perform insulation works at temperatures from 5 to 25 degrees Celsius.