Tile leveling system COMENSAL clips 2mm 100pcs

The TYPE II leveling system is your quick start to trouble-free tile laying.

Check how you can increase the efficiency of your work:

Express work pace? - Efficient clip removal!

Reduction of stress and risk of making mistakes? - Laying like an expert, regardless of experience!

Saving time? - Faster, but just as good!

Perfect level? Always guaranteed!

Your renovation? - Our tools

With our leveling system, your renovation will be instant, professional, and free from unnecessary stress.

The result is perfectly laid tiles that will gain recognition from both you and your client.

Thanks to our system, you save valuable time and have full control over your work, regardless of your level of experience.

TYPE II - 2mm clips  - Polish production.

Our disposable clips guarantee a constant joint width, maintaining the same proven pattern;

Manufactured from the highest quality raw materials;

Proven scheme of durable clips and easy knocking out;

The clips have been designed to make their installation as easy as possible without compromising quality;

All clips fit tiles with a typical thickness range: 6mm - max. 16mm

Number of clips in a package: 100 pcs,

What do you gain by using the leveling system?

Your tiles are laid precisely and quickly, without fear of errors, both vertically and horizontally, on small and large surfaces.

An amateur will achieve excellent results without previous experience, and an Expert will speed up their work, without compromising the quality of the laid tiles;

Our system is characterized by trouble-free installation.

Clips tested in quality tests. You can be sure that each element of our system effectively fulfills its task.

Knock out the clips no earlier than after 24 hours.

We also point out that regardless of the system used, knocking out the clips is most effective when the impact force comes from the side, parallel to the surface of the tiles.

This can be done with a firm kick or a firm blow using a rubber hammer.

Attempting to knock out the clips with a metal hammer risks damaging the tile.

It also reduces the effectiveness of breaking out the clips, because for fear of damaging the tile, the blow is usually conservative: weaker and at the wrong angle.

The number of clips needed to do a given job is the result of the size of the tiles being laid and the surface area planned for the project - see photo .

The numbers given in the table are the minimum quantities necessary to use on one square meter of tiles of a given size, without taking into account inserts, cuts and stucco.