Additive for renders ATLAS ESKIMO setting accelerator 0.25kg
- enables rendering and painting at 0°C and in high air humidity (above 80%)
- accelerates coat setting time
- gives early resistance to rain
- neutral to other material properties
Use:
Enables rendering and painting at 0°C – recommended during façade works
in low temperature (0 – 10°C) and high air humidity (above 80%).
Types of modified materials:
• ATLAS ACRYLIC renders
• ATLAS SILICONE renders
• ATLAS DEKO M mosaic renders
• ATLAS ARKOL E and ATLAS SALTA E acrylic paints
• ATLAS FASTEL NOVA and ATLAS SALTA silicone paints.
Properties:
Accelerates water evaporation from the applied render or paint – accelerates the first stage of setting of dispersion products – water evaporation from the applied material.
Therefore, the second stage, consisting in binder setting and drying, can start earlier – the applied material gets resistant to rapid temperature drop and precipitation earlier (already after approx. 6 - 8 hours).
Easy in use – ready-to-use liquid admixture dosed directly to material before application on a façade; easily mixing with rendering mass or paint.
Neutral to other properties of material – does not lead to deterioration of durability or operational parameters after setting.
Does not change the colour of the applied render or paint coat.
Technical data:
ATLAS ESKIMO is manufactured as yellow liquid of smell of ammonia.
The product is not classified as a construction material.
Agent use:
The agent is added to render or paint directly before their application. It is recommended to observe the weight ratio of 1%, i.e. up to 0.25 kg (whole bottle)
with 25 kg of render and up to 0.15 kg (3/5 of a bottle) with 10 l of paint. After thorough manual or machine mixing, the material can be applied.
Important additional information:
• The substrate for render or paint must not be frozen. Recommended application and drying temperature from 0°C up to +10°C.
Freshly applied material gets resistant to precipitation after approx. 6 – 8 hours, depending on ambient temperature and humidity.
• The tools must be cleaned with clean water directly after use.
• Danger. Contains the water ammonia solution CAS 1336-21-6. Causes skin irritation. Causes serious eye damage. Wash hands thoroughly after handling.
Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water with soap. IF IN EYES: Rinse cautiously with
water for several minutes. Remove contact lenses if present and easy to do –continue rinsing. Immediately call a poison center or a doctor. If skin irritation occurs: Get medical advice/attention.
Take off contaminated clothing and wash it before reuse. Follow the instructions in the Safety Data Sheet.
• Keep in tightly sealed original and labeled containers. Keep in dry and cool places, protect against overheating (> 30 °C) and freezing.
Protect against direct sunshine, heat sources, sparkles, flame. Shelf life in conditions as specified is 18 months from the production date shown on the packaging.
Packaging:
Plastic bottle of 0.25 kg