Torggler Panel F is single-component, rapid polyurethane adhesive for gluing plasterboards and insulation boards.
Torggler Panel F gun foam sets in just 60 seconds!
Application:
Renovation of interior walls by gluing plasterboards
Thermal insulation of perimeter walls from the inside by gluing connected insulation boards (plasterboard + EPS or plasterboard + XPS)
Bonding of various types of insulation boards (EPS, XPS, PU, ââmineral or glass wool, etc.) in the construction of external thermal insulation systems
Perimeter underfloor thermal insulation
Properties:
Excellent adhesion on various types of porous and non-porous substrates
It solves any adhesion problem on smooth or moulded boards (adhesion to polystyrene according to ETAG 004)
Extremely fast installation: after 2 hours it can be dowelled and immediately smoothed afterwards
Installation time reduced up to 50% compared to cement glue
Significant reduction of processing and overall costs: with one can it is possible to install about 12 m2 of insulation panels
Avoids the formation of thermal bridges
Extremely clean construction site
It can be used to fill cracks that may occur during the installation of the boards. Its particularly homogeneous and fine cell structure contributes to acoustic and thermal insulation without creating any discontinuity. Despite the excellent performance of PU Foam Panel F in terms of technical and application characteristics in the installation of external thermal insulation systems, traditional mechanical fastening systems (plugs, etc.) that guarantee the anchorage of the boards through the thickness of the substrate are still needed to prevent the risk of adhesive detachment in case of insufficiently solid and consistent surfaces.
