Norm
EN 62311:2020EN 60730-2-9:2010 in concjunction with EN 60730-1:2006+A1:2019ETSI EN 301489-1 V2.2.3
System
WIRED
Cable length
1.5m
Max load of the CH pump output [A]
3(1)
Max load of the DHW pump output [A]
3(1)
Power supply
230V AC 50Hz
DHW sensor cable lenght
3m
Sensor temp. range
-10 – 120°C
System
wired
Setpoint temp. range for CH
5 - 80°C
Setpoint temp. range for DHW
20 - 80°C
Temp measurement range
0 - 99°C
Description
The controller turns on when the boiler temperature exceeds the user-set central heating pump activation temperature. The DHW pump works on the basis of a temperature difference. The DHW pump is switched on when the boiler temperature exceeds the tank temperature by the hysteresis set by the user. The hot water pump works until the boiler and tank temperatures equalize or the set tank temperature is reached.