Plasterboard adhesive ATLAS BONDER+ 20kg

ATLAS BONDER+ 20 kg adhesive for plasterboards

Most important features

very good adhesion to the substrate and to the plasterboard surface

strong bonding of the plasterboard to the substrate

fibre-reinforced – for high stability of the bonded boards

suitable for bonding plaster blocks and plaster stucco

high plasticity for easy application

Product description

Gluing of plasterboard - finishing of interior walls during renovations or in new buildings.

Application of decorative stucco.

Bonding of rigid composite panels for thermal and sound insulation.

Filling of defects up to 30 mm deep in mineral substrates.

Suitable for the following substrates:Brick, block and perforated brick walls and other similar walls made of ceramic or silicate material; gypsum, concrete and aerated concrete surfaces.

Main properties
Contains fibres to improve the stability of the bonded panel - especially with thick layers of adhesive.

High plasticity - the adhesive is easy to apply, changes shape when the board is positioned and pressed against it, and adapts to the irregularities of the substrate.

Optimum correction time for freshly glued panels – up to 20 minutes - allows easy application of the adhesive and enough time for positioning and correcting the boards.

High strength - ensures a permanent and strong bond of the plasterboard to the substrate.

Low shrinkage after setting -there are no internal cracks or deformations in the adhesive layer, so the bond is highly stable immediately after setting.

ATLAS BONDER is a dry mix based on synthetic gypsum, mineral fillers and modifying additives.