Latex paint BIELLUX white matt 10L
Manufacturer PIGMENT Spółka Jawna
Country of manufacture Poland
Norm PN-EN 13300
WASHABLE LATEX PAINT WITH INCREASED COVERAGE
Water-dilutable latex paint BASED ON ACRYLIC RESIN intended for painting surfaces of walls and ceilings indoors. It gives a homogeneous, very well-covering, matt, snow-white coating that is permeable to vapors and gases ("breathing" of the walls). It can be used on a variety of construction materials, such as: mineral and polymer plasters (e.g. acrylic), concrete, bricks, gypsum, after appropriate priming: wood-based materials, paper wallpapers, including the so-called rauhphase, giving smooth, flexible coatings.
DIRTY COATINGS CAN BE CLEANED BY A LIGHT WIPE WITH A DAMP CLOTH.
SURFACE PREPARATION AND APPLICATION:
BIELLUX is a ready-to-use paint, the paint should be mixed well before use, only if it thickens, add up to 5% of tap water. Do not add chalk, lime or other materials.
The surface to be painted should be thoroughly cleaned, loose patches of paint removed and degreased. Old coats of glue and lime paints must be removed. Fresh cement-lime plaster can be painted no earlier than 4 weeks after application. Smooth surfaces should be roughened with sandpaper. Fill holes and cracks with BIEL-PUTZ or FILLER putty by Pigment, larger ones with gypsum or cement mortar.
The substrate should be primed with the acrylic preparation BIEL-GRUNT or GRUNDER PC-33 by Pigment.
The best results can be obtained using the spray method. THE PRODUCT IS NOT INTENDED TO BE COLORED IN A TINTING SYSTEM. If it is necessary to use products from different production batches, it is recommended to mix them together to unify the shade. Any corrections should be made using the "wet on wet" method.
Due to the variety of technologies and raw materials used in products by other manufacturers, the manufacturer is not responsible for the consequences of mixing its product with other products. The paint should be stored in its original and tightly closed packaging.
* The product is available only in white.
available colors: white
paint: with a roller, brush or after appropriate dilution with spray
use and store at 5 ÷ 25 ° C
density according to PN-82 / C-81551: 1.47 g / cm³
applying the next layer, 20 ° C, humidity relative air 50%: after 2 hours
Brookfield viscosity 20 ± 2 ° C, according to PN-ISO 2555: 8500 ÷ 10000 mPa • s
scrub resistance class: 4 according to PN-EN 13300
pH value according to PN-C-04963: 8.0-9.0
solids content PN-EN ISO 3251: 59.0 ÷ 61.0% by weight
drying time at 23 ± 2 ° C, PN-C-81519: 2 hours
recommended wet film thickness PN-EN ISO 2808: 90-100 μm
the largest grain size (granulation), PN-EN 13300: fine up to 100 μm
water vapor transmission coefficient: high> 150 g / (m² · 24 h); sd <0.14 m
recommended number of layers: 2
capacity: 8-10 m² / L
washing tools and diluting: water
Hygienic Certificate NIZP-PZH
Angle. A / a / FW. permissible VOC content for this category: 30 g / L; the product contains <30 g / L
warranty: 24 months from the production date (in original, undamaged packaging)
packaging: 5 L; 10 L.
* The product is also available in the BIO version