ATLAS GEOFLEX WHITE   highly flexible gel adhesive 2-15 mm

Most important features

- ideal for ceramic, porcelain, glass mosaic, natural stone

- for tile on tile, OSB, terrace, balcony, underfloor heating

- bed depth up to 15 mm

- non-slip - even with large tiles

- excellent spread beneath a tile

Product description

ATLAS GEOFLEX WHITE is a white C2TE adhesive for tiles for internal and external application on wall and floor.

Ideal for natural stone, porcelain and glass mosaic.

Wide range of bed thickness from 2 up to 15 mm.

No slip from the wall – cladding can be installed from the top of the wall with no additional support.

Walking on and grouting just after 12 hours – owing to accelerated proces of adhesive setting and drying.nder, aggregates and selected modifying agents.

For application in temperature from 5°C up to 35°C.

Gel technology

The unique gel technology used in ATLAS GEOFLEX WHITE brings the following advantages:

• adhesive is suitable for any type of cladding: natural stone, glass mosaic, ceramic, porcelain,

• consistency of adhesive can be adjusted to individual preferences of the tiler and needs of specific job – mixing ratio is much wider than in case of traditional adhesives,

• bed depth up to 15 mm – substrate levelling and tiling at once,

• full spread under the tile with higher mixing ratio – ensured adhesion and durable bond, which is relevant for exterior use,

• safe cladding installation on surfaces exposed to direct sunlight – during fixing cladding, as well as during mortar setting (e.g. on balcony, terrace).

Technical data

Mixing ratio (water/dry mix) 0,26 ÷ 0,33 l / 1 kg

Min./max. bed depth 2 mm / 15 mm

Pot life approx. 4 hours

Open time min. 30 minutes

Floor access/ grouting after 12 hours