Flatness guide for plaster and render galvanized steel 10mm x 3.0m

W10 PLASTERING GUIDE STRIP

The handles shown in the photos are sold separately.

PRODUCT DESCRIPTION:
W10 STANDARD plaster guide strip made of galvanized steel. The modified mushroom shape improves the strip's rigidity.
The lateral bend stabilizes the strip during plastering work.
Careful and refined packaging allows for safe and quick transport of strips.

MATERIAL:
Galvanized steel – this is steel protected against corrosion by a zinc coating.
The zinc coating protects the steel for many years and requires no maintenance.

INTENDED USE:
The strips are designed for applying thin-layer gypsum plasters with a thickness of 6mm or 10mm.

USE:
The strips should be mounted vertically on the wall using plaster to create a surface corresponding to the final plaster surface.
The distance between the strips must allow for the removal of excess plaster using a plastering trowel. Apply plaster to the spaces between the strips, then remove the excess plaster using a plastering trowel, moving the trowel across the strips.
The strips should be removed from the wall before the plaster dries.

NOTE:
Do not leave the strips in the wall due to the potential corrosion of galvanized steel in the aggressive chemical environment of gypsum plaster mortars.