EPS and XPS Basecoat Adhesive Atlas HOTER U white 25kg

EPS Basecoat Adhesive ATLAS HOTER U white 25kg 2 in 1: adhesive for EPS, XPS application and for mesh embedding colour white

Product description:
2 in 1 – designed for fixing thermal insulation boards and for the reinforced layer (base coat) installation in the external thermal insulation of buildings.
Element of the thermal insulation systems – an element of composite thermal insulation systems, granted the European Technical Approval (ETA).

Main properties:
high adhesiveness
good water vapour permeability
reinforced with microfibres
resistant to cracks and scratches
also for graphite - enhanced EPS
BBA Certificate
NSAI Certificate
Main parameters
base coat bed thickness: 2 - 5 mm
adhesion to concrete: min. 0.25 MPa
adhesion to expanded polystyrene: min. 0.08 MPa
consumption: boards application: from 4.0 to 5.0 kg/m²
consumption: base coat application: from 3.0 to 3.5 kg/m²

Use:
2 in 1 – designed for fixing thermal insulation boards and for the reinforced layer (base coat) installation in the external thermal insulation of buildings.
Element of the thermal insulation systems – an element of composite thermal insulation systems, granted the European Technical Approval (ETA).
Enables fixing various expanded polystyrene boards – including graphite - enhanced and elasticized expanded polystyrene boards.
TYPES OF SUBSTRATES: CONCRETE OF ALL CLASSES, AERATED CONCRETE, CEMENT OR LIME-CEMENT PLASTERS, SANDSTONE AND ROUGH WALLS OF BRICKS, BLOCKS, HOLLOW BLOCKS AND OTHER CERAMIC OR SILICATE MATERIALS.

Properties:
Flexible – compensates thermal and mechanical stress exerted on other layers of the system.
Increased resistance to cracking – it is reinforced with cellulose fibres.
High adhesion – strongly bonds to mineral substrates.
High water vapour permeability – does not restrict water vapour transmission through the insulated wall.

Consumption:
Individual consumption of the adhesive depends on the properties of the substrate (e.g. evenness) and the technique of boards/panels application.
Boards application: from 4.0 to 5.0 kg/m².
Basecoat application: from 3.0 to 3.5 kg/m².